10 TUNING THE CHASSIS 74
10.2 Adjusting the shift lever
Info
The adjustment range of the shift lever is limited.
B00780-10
– Loosen nuts 1.
– Adjust the shift lever by turning shift rod 2.
Guideline
Shift rod adjustment range A 100… 112 mm (3.94… 4.41 in)
Info
Make the same adjustments on both sides.
At least five screw threads must be screwed into the seating.
– Check adjusting angle B.
Guideline
Adjusting angle B shift rod, deflector,
shift lever
90°
– Tighten nuts 1.
Info
After the nuts have been tightened, the bearings of the shift rod must be cen-
trally and identically aligned to each other in order to ensure freedom of move-
ment in the bearing shells.
– Check the shift lever to ensure it is functioning properly and can move freely.
To Next Page
Loading...
Need help?
General
