SERVICE SCHEDULE (EXC‑F, EXC‑F SIX DAYS, XCF-W) 36
10.2Important maintenance work to be carried out by an authorized KTM workshop (as additional order)
Competition use Hobby use S10N J1A
S10A S20A S40A S80A S20A S40A S60A S80A
Perform a fork service. (EXC‑F,
EXC‑F SIX DAYS, XCF-W) x
• • • • •
Perform a shock absorber service.
(EXC‑F, EXC‑F SIX DAYS, XCF-W) x
• • •
Grease the steering head bearing. x
•
Treat electric contacts with contact
spray.
•
Change the hydraulic clutch fluid. x
( p. 83)
•
Change the front brake fluid. x
•
Change the rear brake fluid. x
•
Check the clutch discs for wear. x
• • • • •
Check the clutch. x
• • • • •
Check the cylinder and piston for
wear. x
• • •
Check the camshafts. x
• • •
Check the valve spring seat. x
• • •
Check the valves. x
• • •
Change the valves. x
• •
Check wear of valve guides. x
• •
Change the valve springs. x
• • •
Check the timing-chain tensioner
function. x
• • •
Check the crankshaft run-out at the
bearing pin. x
• • •
Change the conrod bearing. x
• • •
Change the crankshaft main bear-
ing. x
• •
Fully check the transmission. x
• • •
Check the shift mechanism. x
• • •
Check the spring length of the oil pres-
sure regulator valve. x
• • •
Change the glass fiber yarn filling of
the main silencer. x
• • • • • • • •
Change the foot brake cylinder
seals. x
• • • • •
Check/adjust the carburetor compo-
nents. x
• • • • •
S10A: every 10 service hours
S20A: every 20 service hours / after every race
S40A: every 40 service hours
S60A: every 60 service hours
S80A: every 80 service hours
S10N: once after 10 operating hours
J1A: annually