SERVICE SCHEDULE FOR RIDER 39
12.1Important checks and maintenance work to be carried out by the rider
NB1A
Check the engine oil level. ( p. 87) •
Check the brake fluid level of the front brake. ( p. 62) •
Check the rear brake fluid level. ( p. 66) •
Check the front brake linings. ( p. 64) •
Check the rear brake linings. ( p. 67) •
Check and adjust the cables. •
Bleed fork legs. ( p. 48) •
Clean the dust boots of the fork legs. ( p. 48) •
Clean the chain. ( p. 56) •
Check the chain tension. ( p. 57) •
Check the chain wear. ( p. 58) •
Check rear sprocket/engine sprocket for wear. ( p. 57) •
Clean the air filter. x ( p. 82)
•
Check the tire air pressure. ( p. 73) •
Check the tire condition. ( p. 72) •
Check the coolant level. ( p. 79) •
Empty the carburetor float chamber. x ( p. 86)
•
Check all controls for smooth operation. •
Check braking. •
Check all screws, nuts and hose clamps regularly for tightness. •
NB1A: Depending on conditions of use according to requirements.
To Next Page
Loading...
Need help?
General
