KTM 250 EXC TPI User Manual

10 SERVICE SCHEDULE
52
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Every 80 operating hours
Every 40 operating hours
After 20 operating hours
After 10 operating hours
every 12 months
Clean the oil screen in the oil tank. ( p. 144) ●
Clean the protection cap of the pressure sensor. ● ● ● ●
Perform minor engine service. (Check the exhaust control for functioning and
smooth operation. Check the clutch.)
● ● ● ●
Perform major engine service including removing and installing the engine.
(Change the connecting rod, conrod bearing, and crank pin. Clean the hose
connections of the pressure sensor. Check the transmission and shift mecha-
nism. Change all engine bearings.)
● ●
○ One-time interval
● Periodic interval

KTM 250 EXC TPI Specifications

General

Displacement	249 cm³
Cooling	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake
Rear Brake	Disc brake
Ground Clearance	370 mm
Seat Height	960 mm
Bore x Stroke	66.4 mm x 72 mm
Engine Type	1-cylinder, 2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP Xplor shock absorber
Fuel Capacity	9 l
Frame	Central tube frame made of chrome molybdenum steel