EasyManuals Logo
Home>KTM>Motorcycle>250 EXC TPI

KTM 250 EXC TPI User Manual

KTM 250 EXC TPI
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
16 COOLING SYSTEM
132
Warning
Danger of poisoningCoolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Position the motorcycle upright.
Place an appropriate container under the water pump cover.
S03527-10
Remove screw
1
. Take off radiator cap
2
.
Completely drain the coolant.
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw, water pump
cover
M6 10 Nm (7.4 lbf ft)
16.5 Refilling with coolant
Warning
Danger of poisoningCoolant is toxic and a health hazard.
Keep coolant out of the reach of children.
Do not allow coolant to come into contact with the skin, the eyes and clothing.
Consult a doctor immediately if coolant is swallowed.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
Change clothing if coolant spills onto your clothing.
S03528-10
Main work
Make sure that screw
1
is tightened.
Position the motorcycle upright.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 EXC TPI and is the answer not in the manual?

KTM 250 EXC TPI Specifications

General IconGeneral
BrandKTM
Model250 EXC TPI
CategoryMotorcycle
LanguageEnglish

Related product manuals