EasyManuals Logo
Home>KTM>Motorcycle>250 SX 2019

KTM 250 SX 2019 User Manual

KTM 250 SX  2019
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
SERVICE SCHEDULE 9
37
after every race
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
Once after 5 operating hours
Once after 1 operating hour
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without sharp bends, and set
correctly.
Clean the air filter and air filter box. ( p. 67)
Change glass fiber yarn filling in the main silencer. ( p. 69)
Service the fork.
Perform the shock absorber service.
Check the screws and nuts for tightness.
Check idle.
Final check: Check the vehicle for operating safety and take a test ride.
Make the service entry in the KTM Dealer.net and in the Service and Warranty Book-
let.
One-time interval
Periodic interval
9.3 Recommended work
Every 40 operating hours when used for motorsports
Annually
Every 80 operating hours
Every 40 operating hours
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours / Every 10 operating hours
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid. ( p. 81)
Lubricate the steering head bearing. ( p. 59)
Service the fork.
Perform the shock absorber service.
Check/adjust the carburetor components.
Check the electric starter drive.
Check the reed valve housing, reed valve and intake flange.
Perform minor engine service. (Check the reed valve housing, reed valve, and intake
flange. Check the clutch. Under difficult operating conditions: Change the piston
and check the cylinder and Z dimension.) (All SX models)
Perform the intermediate engine service. (Change the piston and check the cylin-
der and Z dimension. Check the exhaust control for functioning and smooth opera-
tion.) (All SX models)
Perform major engine service including removing and installing the engine. (Change
the connecting rod, conrod bearing, and crank pin. Check the transmission and shift
mechanism. Change all engine bearings.) (All SX models)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 SX 2019 and is the answer not in the manual?

KTM 250 SX 2019 Specifications

General IconGeneral
BrandKTM
Model250 SX 2019
CategoryMotorcycle
LanguageEnglish

Related product manuals