KTM 250 XC-F 2021 User Manual

11 SERVICE WORK ON THE CHASSIS
62
– Remove the motorcycle from the lift stand. ( p. 50)
11.17 Lubricating the steering head bearing
H02387-01
– Remove the lower triple clamp. ( p. 56)
– Install the lower triple clamp. ( p. 57)
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
11.18 Removing the start number plate
F01524-10
–
Remove screw
1
.
– Unhook the start number plate from the brake line and remove
it.
11.19 Installing the start number plate
F01525-10
–
Position the brake line in holders
A
on the start number
plate.
–
Position the start number plate. Mount and tighten screw
1
.
The holding lugs engage in the fender.
11.20 Removing front fender
Preparatory work
– Remove the start number plate. ( p. 62)

KTM 250 XC-F 2021 Specifications

General

Brand	KTM
Model	250 XC-F 2021
Category	Motorcycle
Language	English