KTM 300 XC-W TPI 2019 User Manual

STORAGE 20
149
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because
the engine will not warm up sufficiently, the water
vapor produced during combustion will condense, caus-
ing engine parts and the exhaust system to rust.
20.2 Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 66)
– Install the battery. ( p. 118)
– Perform checks and maintenance measures when preparing for
use. ( p. 45)
– Make a test ride.

KTM 300 XC-W TPI 2019 Specifications

General

Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	2-stroke
Fuel System	TPI (Transfer Port Injection)
Front Suspension	WP XPlor 48
Rear Suspension	WP XPlor PDS
Front Brake	260 mm disc
Rear Brake	220 mm disc
Fuel Capacity	9 liters
Frame	Central-tube frame with double-cradle