EasyManuals Logo
Home>KTM>Motorcycle>300 XC-W TPI 2019

KTM 300 XC-W TPI 2019 User Manual

KTM 300 XC-W TPI 2019
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
11 TUNING THE CHASSIS
54
11.1 Checking the basic chassis setting with the rider's weight
Info
When adjusting the basic chassis setting, first adjust the shock absorber and then the fork.
401030-01
For optimal motorcycle riding characteristics and to avoid
damage to forks, shock absorbers, swingarm and frame, the
basic settings of the suspension components must match the
rider's weight.
As delivered, KTM offroad motorcycles are adjusted for a stan-
dard rider weight (with full protective clothing).
Guideline
Standard rider weight 75 85 kg (165
187 lb.)
If the rider's weight is above or below the standard range, the
basic setting of the suspension components must be adjusted
accordingly.
Small weight differences can be compensated by adjusting the
spring preload, but in the case of large weight differences, the
springs must be replaced.
11.2 Compression damping of the shock absorber
The compression damping of the shock absorber is divided into two ranges: high-speed and low-speed.
High-speed and low-speed refer to the compression speed of the rear wheel suspension and not to the vehicle
speed.
The high-speed setting, for example, has an effect on the landing after a jump: the rear wheel suspension com-
presses quickly.
The low-speed setting, for example, has an effect when riding over long ground swells: the rear wheel suspension
compresses slowly.
These two ranges can be adjusted separately, although the transition between high-speed and low-speed is grad-
ual. Thus, changes in the high-speed range affect the compression damping in the low-speed range and vice
versa.
11.3 Adjusting the low-speed compression damping of the shock absorber
Caution
Risk of injuryParts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
Please follow the description provided. (Your authorized KTM workshop will be glad to help.)
Info
The effect of the low-speed setting can be seen in slow to normal compression of the shock absorber.

Table of Contents

Other manuals for KTM 300 XC-W TPI 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 300 XC-W TPI 2019 and is the answer not in the manual?

KTM 300 XC-W TPI 2019 Specifications

General IconGeneral
BrandKTM
Model300 XC-W TPI 2019
CategoryMotorcycle
LanguageEnglish

Related product manuals