22 TECHNICAL DATA
144
Static sag 35 mm (1.38 in)
Riding sag 105 mm (4.13 in)
Fitted length 477 mm (18.78 in)
Shock absorber oil Shock absorber fluid (SAE 2.5)
(50180751S1) ( p. 148)
22.9 Chassis tightening torques
Screw, air filter box cover EJOT PT
®
K60x20-Z 3 Nm (2.2 lbf ft)
Screw, combination switch EJOT PT
®
K50x18 T20 2 Nm (1.5 lbf ft)
Screw, intake air temperature sen-
sor
EJOT DELTA PT
®
45x12‑Z 0.7 Nm (0.52 lbf ft)
Screw, radiator hoses clip 2.4 Nm (1.77 lbf ft)
Fitting, start button M3 0.4 Nm (0.3 lbf ft)
Fitting, switch-off button M3 0.4 Nm (0.3 lbf ft)
Fitting, inlet sleeve to throttle
valve body
M4 2.8 Nm (2.07 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, service hour counter M4 0.8 Nm (0.59 lbf ft)
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting
ring
M5 5 Nm (3.7 lbf ft)
Screw, throttle valve body cover M5 2.6 Nm (1.92 lbf ft)
Nut, cable on starter motor M6 4 Nm (3 lbf ft)
Nut, throttle cable on throttle valve
body
M6 3 Nm (2.2 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ball joint of push rod on
foot brake cylinder
M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, battery support bracket M6 6 Nm (4.4 lbf ft)
Screw, cable on starter relay M6 6 Nm (4.4 lbf ft)
Screw, chain guide on link fork M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, chain sliding guard M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Screw, fuel tank spoiler on radiator M6 6 Nm (4.4 lbf ft)
Screw, hand lever M6 5 Nm (3.7 lbf ft)
Screw, indicator lamp bracket M6 5 Nm (3.7 lbf ft)
To Next Page
Loading...
Need help?
General
