KTM 390 DUKE 2017 User Manual

10 SERVICE SCHEDULE
108
10.1 Additional information
Any further work that results from the required work or from the recommended work must be ordered separately
and can be invoiced separately.
Depending on local operating conditions, service intervals may vary in your country.
10.2 Required work
Every two years
Every year
every 15,000 km (9,300 mi)
every 7,500 km (4,650 mi)
after 1,000 km (620 mi)
Read out the fault memory using the KTM diagnostics tool. ○ ● ● ● ●
Check that the electrical system is functioning properly. ○ ● ● ● ●
Change the engine oil and oil filter and clean the oil screens. ( p. 200) ○ ● ● ● ●
Check the brake discs. ( p. 138) ○ ● ● ● ●
Check the front brake linings. ( p. 143) ○ ● ● ● ●
Check the rear brake linings. ( p. 152) ○ ● ● ● ●
Check the brake lines for damage and leakage. ○ ● ● ● ●
Check the brake fluid level of the front brake. ( p. 139) ○ ● ● ●
Check the rear brake fluid level. ( p. 148) ○ ● ● ●
Check the tire condition. ( p. 164) ○ ● ● ● ●

KTM 390 DUKE 2017 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Torque	37 Nm @ 7, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling	Liquid cooled
Frame	Steel trellis frame, powder coated
Rear Suspension	WP monoshock
Front Tire	110/70 R17
Rear Tire	150/60 R17
Seat Height	830 mm
Ground Clearance	185 mm
Dry Weight	149 kg
Engine Type	Single cylinder, 4-stroke
Power	32 kW (44 hp) @ 9, 000 rpm
Clutch	Wet multi-disc clutch
Front Suspension	WP upside-down Ø 43 mm
Front Brake	320 mm Disc, Four-Piston Radial Fixed Caliper
Rear Brake	230 mm Disc, Single-Piston Floating Caliper
ABS	Bosch 9MB two-channel ABS
Fuel Tank Capacity	13.4 liters