12 SERVICE WORK ON THE CHASSIS
126
12.12 Checking the chain tension
Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
– Check the chain tension regularly.
– Set the chain tension in accordance with the specification.
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 115)
M00714-10
Main work
– Shift gear to neutral.
– In the area of the chain sliding guard, press the chain upward
toward the swingarm and determine chain tension
A
.
Info
The upper part of chain
B
must be taut.
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
To Next Page
Loading...
Need help?
General
