15 ELECTRICAL SYSTEM
183
The light-dark boundary must lie exactly on the lower
mark when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet
specifications:
– Adjust the headlight range. ( p. 183)
15.9 Adjusting the headlight range
Preparatory work
– Check the headlight setting. ( p. 182)
F00850-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
1
also secures the headlight. Ensure the screw
is always screwed in far enough.
To Next Page
Loading...
Need help?
General
