KTM 390 DUKE 2017 User Manual

16 COOLING SYSTEM
195
F00856-10
Main work
–
Remove radiator cap
1
.
F00870-10
–
Loosen bleeder screw
2
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in coolant until it emerges without bubbles at the bleeder
screw, and then mount and tighten the bleeder screw immedi-
ately.
Coolant ( p. 237)
– Completely fill the radiator with coolant. Mount the radiator
cap.
– Rest the vehicle on the side stand.

KTM 390 DUKE 2017 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Torque	37 Nm @ 7, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Cooling	Liquid cooled
Frame	Steel trellis frame, powder coated
Rear Suspension	WP monoshock
Front Tire	110/70 R17
Rear Tire	150/60 R17
Seat Height	830 mm
Ground Clearance	185 mm
Dry Weight	149 kg
Engine Type	Single cylinder, 4-stroke
Power	32 kW (44 hp) @ 9, 000 rpm
Clutch	Wet multi-disc clutch
Front Suspension	WP upside-down Ø 43 mm
Front Brake	320 mm Disc, Four-Piston Radial Fixed Caliper
Rear Brake	230 mm Disc, Single-Piston Floating Caliper
ABS	Bosch 9MB two-channel ABS
Fuel Tank Capacity	13.4 liters