SERVICE SCHEDULE 48
S10A S20A S40A S80A J1A J2A
Check the crankshaft run-out at the bearing pin. x
• •
Change the conrod bearing. x
• •
Check the seating of the piston pin. x
• •
Change the crankshaft main bearing. x
• •
Fully check the transmission. x
• •
Check the shift mechanism. x
• •
Check the spring length of the oil pressure regulator valve. x
• •
Change glass fiber yarn filling of main silencer. x
• • • •
Replace foot brake cylinder seals. x
• • •
Check/set the carburetor components. x
• • • •
S10A: Every 10 service hours - corresponds to about 70 liters of fuel (18.5 US gal) / after every race
S20A: Every 20 service hours - corresponds to about 140 liters of fuel (37 US gal)
S40A: Every 40 service hours - corresponds to about 280 liters of fuel (74 US gal)
S80A: Every 80 service hours - corresponds to about 560 liters of fuel (148 US gal)
J1A: annually
J2A: every 2 years
8.3Important checks and maintenance work to be carried out by the rider
NB1A
Check the engine oil level. ( p. 143) •
Check the front brake fluid level. ( p. 89) •
Check the rear brake fluid level. ( p. 99) •
Check the front brake linings. ( p. 92) •
Check the rear brake linings. ( p. 102) •
To Next Page
Loading...
Need help?
General
