MAINTENANCE ON CHASSIS AND ENGINE 104
100066-10
Note
Danger of damage Kinking of brake line.
– Position and handle the brake line without straining it. The brake line must be
replaced if it is kinked.
– Swing the brake caliper up, unhook it from the brake caliper support and set it down.
– Remove the brake linings .
– Clean brake caliper and brake caliper support.
9.49Installing the rear brake linings x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents Reduced braking efficiency due to use of non-approved brake linings.
– Brake linings available from accessory suppliers are often not tested and approved for use on KTM vehicles. The construction
and friction factor of the brake linings and therefore the brake power can differ considerably from the original KTM brake lin-
ings. If brake linings are used that differ from the originals, there is no guarantee that they comply with the original license.
The vehicle no longer corresponds to the condition at delivery, and the warranty is no longer valid.
– Check the brake discs. ( p. 87)
To Next Page
Loading...
Need help?
General
