MAINTENANCE ON CHASSIS AND ENGINE 56
301790-10
– Cross over setting is measured between sliding bushing and the collar of adjusting
ring .
Guideline
Cross over 19±1.5 mm (0.75±0.059 in)
Info
Measured with no preload on the
main spring.
– Tighten the spring by turning adjusting ring to setting .
Info
The left and right shock absorbers should have the same settings.
– Tighten the adjusting ring.
– Remove the vehicle from the work stand. ( p. 50)
9.9Front shock absorber - adjusting the spring preload
Danger
Danger of accidents Disassembly of pressurized parts can lead to injury.
– The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
– Make adjustments in small steps only.
To Next Page
Loading...
Need help?
General
