MAINTENANCE ON CHASSIS AND ENGINE 57
Info
Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.
Tip
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
– Jack up the vehicle. ( p. 50)
– Clean the shock absorber thoroughly.
301790-11
– Loosen lock ring .
Hook wrench (83019001000)
– Turn adjusting ring until the spring pack is fully unloaded.
– Measure the entire spring pack when it is unloaded.
To Next Page
Loading...
Need help?
General
