KTM 85 SX 2020 User Manual

SUBSTANCES 21
121
Brake fluid DOT 4 / DOT 5.1
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that
exhibits the corresponding properties.
Recommended supplier
Castrol
– REACT PERFORMANCE DOT 4
MOTOREX
®
– Brake Fluid DOT 5.1
Coolant
Guideline
– Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
– Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protec-
tion and lubrication properties.
– Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least −25 °C (−13 °F)
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs
to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility)
with other coolants.
Recommended supplier
MOTOREX
®
– COOLANT M3.0
Engine oil (15W/50)
Standard/classification
– JASO T903 MA2 ( p. 125)
– SAE ( p. 125) (15W/50)
Guideline
– Use only engine oils that comply with the specified standards (see specifications on the container) and that
possess the corresponding properties.
Recommended supplier
MOTOREX
®
– Top Speed 4T
Engine oil, 2-stroke
Standard/classification
– JASO FD ( p. 125)
Guideline
– Only use high grade 2-stroke engine oil of a reputable brand.
Fully synthetic

KTM 85 SX 2020 Specifications

General

Brand	KTM
Model	85 SX 2020
Category	Motorcycle
Language	English