KTM 85 SX 2020 User Manual

SERVICE WORK ON THE CHASSIS 11
47
M01561-10
– Position the brake caliper with the spacers.
–
Mount screws
6
, but do not tighten yet.
Guideline
Screw, front
brake caliper
M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
– Position the brake line and the clamp. Mount and tighten
screws
7
.
– Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc. Secure the
hand brake lever in the activated position.
The brake caliper straightens.
–
Tighten screws
6
.
Guideline
Screw, front
brake caliper
M8 25 Nm (18.4 lbf ft)
Loctite
®
243™
– Remove the locking piece of the hand brake lever.
– Remove the motorcycle from the lift stand. ( p. 44)
– Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
Tighten screws
8
.
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
11.7 Removing the fork protector
V00824-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork pro-
tector.
–
Remove screws
3
on the right fork leg. Take off the fork pro-
tector.
11.8 Installing the fork protector
V00825-10
– Position the fork protector on the right fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
– Position the fork protector on the left fork leg. Mount and
tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)

KTM 85 SX 2020 Specifications

General

Brand	KTM
Model	85 SX 2020
Category	Motorcycle
Language	English