SERVICE WORK ON THE CHASSIS 11
71
V00850-10
–
Fill bleeding syringe
4
with the appropriate hydraulic fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 ( p. 122)
–
On the clutch slave cylinder, remove bleeder screw
5
and
mount bleeding syringe
4
.
V00849-10
–
Inject the liquid into the system until it escapes from open-
ing
A
of the master cylinder without bubbles.
– Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
– Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
– Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
4 mm (0.16 in)
– Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
To Next Page
Loading...
