KTM 890 DUKE 2021 User Manual

19 SERVICE WORK ON THE ENGINE
112
19.4 Checking the free travel of the clutch lever
Note
Clutch damage If there is no free travel by the clutch lever, the clutch will begin to slip.
– Check the free travel of the clutch lever each time before using the motorcycle.
– Adjust the free travel of the clutch lever when necessary in accordance with the specification.
V01187-12
– Check the clutch lever for smooth operation.
– Move the handlebar to the straight-ahead position.
– Pull the clutch lever until resistance is perceptible, and deter-
mine the free travel
A
.
Free travel of clutch
lever
A
5 mm (0.2 in)
» If the free travel of the clutch lever does not meet specifi-
cations:
– Set the free travel of the clutch lever. ( p. 112)
– Move the handlebar to and fro over the entire steering range.
The free travel of the clutch lever must not change.
» If the free travel of the clutch lever changes:
– Check the routing of the clutch cable.
19.5 Setting the free travel of the clutch lever
V01234-10
– Move the handlebar to the straight-ahead position.
–
Loosen lock nut
1
.
–
Adjust the free travel
A
by turning adjusting screw
2
.
Guideline
Free travel of clutch
lever
A
5 mm (0.2 in)
–
Tighten lock nut
1
.

KTM 890 DUKE 2021 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Seat Height	820 mm
Dry Weight	169 kg
Bore x Stroke	90.7 mm x 68.8 mm
Compression Ratio	13.5:1
Fuel System	Electronic Fuel Injection
Final Drive	Chain
Front Suspension	WP APEX 43
Traction Control	MTC (Motorcycle Traction Control)
Instruments	TFT display
Lighting	LED
Power	115 hp
Torque	92 Nm
Fuel Capacity	14 liters
Frame	Chromium-Molybdenum-Steel frame
Rear Suspension	WP APEX
Front Brake	2 x 300 mm discs, 4-piston calipers
Rear Brake	240 mm disc
ABS	Bosch 9.1 MP (incl. cornering ABS and supermoto mode)
Wheelbase	1, 476 mm