KTM 890 DUKE 2021 User Manual

13 SERVICE WORK ON THE CHASSIS
66
13.6 Removing the passenger seat
V01232-10
–
Insert the ignition key in seat lock
1
and turn it clockwise.
– Raise the rear of the passenger seat cover, push it toward the
rear, and remove it upward.
– Remove the ignition key from the seat lock.
13.7 Mounting the passenger seat
V01233-10
–
Hook holding lugs
1
of the passenger seat onto the storage
compartment, lower the rear and push forward.
– Press passenger seat downward until it clicks into place.
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
– After assembly, check whether the seat is correctly
locked and cannot be pulled up.
– Finally, check that the passenger seat is correctly mounted.
13.8 Removing the front rider's seat
Preparatory work
– Remove the passenger seat. ( p. 66)
V01239-10
Main work
–
Remove screws
1
.
– Raise the rear of the front rider's seat, pull the seat back, and
lift it off.

KTM 890 DUKE 2021 Specifications

General

Brand	KTM
Model	890 DUKE 2021
Category	Motorcycle
Language	English