KTM 890 DUKE 2021 User Manual

13 SERVICE WORK ON THE CHASSIS
64
13.1 Raising the motorcycle with the rear lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
402346-01
– Mount the supports of the lifting gear.
– Insert the adapter in the rear lifting gear.
Retaining adapter (63529955000)
Rear wheel work stand (69329955000)
– Stand the motorcycle upright, align the lifting gear to the
swingarm and the adapters, and raise the motorcycle.
13.2 Removing the rear of the motorcycle from the lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
402029-10
– Secure the motorcycle against falling over.
– Remove the rear lifting gear and lean the vehicle on side
stand
1
.
– Remove the retaining adapter from the link fork.
13.3 Lifting the motorcycle with the front lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 64)
402344-01
Main work
– Move the handlebar to the straight-ahead position. Align the
lifting gear at the front with the adapters to the fork legs.
Front wheel work stand, small (61129965100)
Info
Always raise the motorcycle at the rear first.
– Lift the motorcycle at the front.

KTM 890 DUKE 2021 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Seat Height	820 mm
Dry Weight	169 kg
Bore x Stroke	90.7 mm x 68.8 mm
Compression Ratio	13.5:1
Fuel System	Electronic Fuel Injection
Final Drive	Chain
Front Suspension	WP APEX 43
Traction Control	MTC (Motorcycle Traction Control)
Instruments	TFT display
Lighting	LED
Power	115 hp
Torque	92 Nm
Fuel Capacity	14 liters
Frame	Chromium-Molybdenum-Steel frame
Rear Suspension	WP APEX
Front Brake	2 x 300 mm discs, 4-piston calipers
Rear Brake	240 mm disc
ABS	Bosch 9.1 MP (incl. cornering ABS and supermoto mode)
Wheelbase	1, 476 mm