Section 4: Optional Equipment
Table of Contents
AP-SC4060 & AP-SC4072 Skid Steer Rotary Cutters 326-765MK12/14/18
23
Hydraulic Motor and Hose Bundle
Figure 4-4
Operator Protective Door
Figure 4-5
39993
24609
Hydraulic Motor and Hose Bundles
Refer to Figure 4-4:
SC4060
15-26 GPM Motor and Hose Bundle326-846A
27-43 GPM Motor and Hose Bundle326-848A
SC4072
15-26 GPM Motor and Hose Bundle326-860A
27-43 GPM Motor and Hose Bundle326-861A
To meet your skid steer requirements, Kubota offers two
motor and hose assemblies for the SC4060 and
SC4072. The bundles are interchangeable and do not
require adapter kits. Compare your motor’s gpm rating
located on an attached decal with the gpm ratings above:
If your cutter’s motor and hose assembly is not
compatible with your skid steer, you should replace it
with one of the assemblies above.
Protective Door Assembly
Refer to Figure 4-4:
Protective Door Assembly326-024A
The skid steer MUST be equipped with an Operator
Protective Door for shielding against flying debris when
attached to a Rotary Cutter. Kubota offers a universal
Operator Protective Door shield that attaches to your skid
steer’s hand hold with two u-bolts. Some notching in the
shield may be required to fit your particular skid steer
model. See “Operator Protective Door (Optional)” on
page 14 for additional information.
The owner may choose to use a protective door provided
by their skid steer supplier. Kubota offers a Operator
Protective Door Kit #S6686 which can be used with the
Kubota SVL. See your nearest Kubota dealer if
purchasing this kit.
To Next Page
Loading...
Need help?
General
