Section 7: Features & Benefits
Table of Contents
AP-SC4060 & AP-SC4072 Skid Steer Rotary Cutters 326-765MK12/14/18
31
SC40 Series (Skid Steer)
Features Benefits
Standard motor @ 16-25 gpm
High flow motor @ 26-43 gpm
Customer can choose one of two optional motors for the SC4060 or SC4072 cutter
(standard and high flow). This allows the cutter to fit a wide variety of Skid Steers.
Also the deck can be upgraded to a different motor when owner upgrades Skid
Steer.
Case drain Protects hydraulic motor.
1/4" Side panels for
overall reinforcement
Protects sides from debris being thrown against them from the blades.
Front and rear chain guards Single chain guards on the front and rear of deck. Reduces flying debris.
Replaceable skid shoes Protect side plate structure. Shoes are replaceable for convenience.
1/2" x 5" Heat-treated
free-swinging blades
Heat-treated blades offer longer life.
Free-swinging blades protect from obstructions.
4" Diameter cutting capacity Can aid in clearing brush.
SC4060 High blade tip speed
Standard motor = 15,668 fpm at 25 gpm.
High flow motor = 15,440 fpm at 43 gpm.
SC4072 High blade tip speed
Standard motor = 16,678 fpm at 25 gpm.
High flow motor = 18,527 fpm at 43 gpm.
Optional front roller wheels
Aid in the forward motion of the cutter and help protect against running the cutter
frame into the ground. The rollers will also help in lengthening the life of the cutter’s
front end skid shoes.
Motor pressure gauge Allows the operator to ensure that the motor is operating at proper psi.
Bi-directional blade rotation Customer can switch direction of blade rotation to utilize both sides of blades.
Height adjustment safety chain
Provides additional operator protection from flying objects by allowing the Rotary
Cutter to only be lifted up to 18".
Section 7: Features & Benefits
To Next Page
Loading...
Need help?
General
