2 SPECIFICATIONS
SPECIFICATIONS
SPECIFICATION TABLE
Model B2630HSD B3030HSD B3000HSDCC
PTO power kW (HP) 14.5 (19.5)* 17.1 (23.0)*
Engine
Maker KUBOTA
Model D1105-E3-D21 V1505-E3-D21 V1505-E3-D21-Q
Type Indirect Injection. Vertical, water-cooled 4 cycle diesel
Number of cylinders 3 4
Bore and stroke mm (in.) 78x78.4 ( 3.1x3.1)
Total displacement cm (cu.in.) 1123 (68.5) 1498 (91.5)
Engine gross power kW (HP) 19.4 (26.0)* 22.3 (30.0)*
Rated revolution rpm 2800 2600
Low idling revolution rpm 1000-1100
Maximum torque N-m (ft-lb) 77.6 (57.2) 98.7 (72.7)
Battery 12 V, RC : 79 min, CCA : 430 A
12 V, RC : 80 min,
CCA : 430 A
Capacities
Fuel tank L (U.S.gals.) 31 (8.1)
Engine crankcase
(with filter)
L (U.S.qts.) 3.0 (3.2) 4.1 (4.3)
Engine coolant L (U.S.qts.) 4.5 (4.7) 5.2 (5.5)
Transmission case L (U.S.gals.) 15 (4.0)
Dimensions
Overall length (without 3P) mm (in.) 2520 (99.2) 2640 (103.9)
Overall width (min. tread) mm (in.) 1365 (53.7)
Overall height mm (in.) 1995 (78.5) 2150 (84.6)
Wheel base mm (in.) 1666 (65.6)
Minimum ground clearance mm (in.) 370 (14.6)
Tread
Front mm (in.) 935 (36.8)
Rear mm (in.) 1050 (41.3)
Weight (with ROPS or CAB) kg (lbs.) 810 (1786) 840 (1852) 1030 (2271)
Clutch N/A
Traveling
system
Tires
Front 7-12
Rear 12.4-16
Steering Hydrostatic type power steering
Transmission
Main-hydrostatic transmission,
3 range gear shift (3 forward, 3 reverse)
Brake Wet disk type
Minimum turning radius
(with brake)
m (feet) 2.1 (6.9)
To Next Page
Loading...
Need help?
General
