35HYDRAULIC UNIT
HYDRAULIC UNIT
3-POINT HITCH CONTROL SYSTEM
BPosition Control
This will control the working depth of 3-point hitch
mounted implement regardless of the amount of pull
required.
B3-point Hitch Lowering Speed
To avoid personal injury:
A Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to two or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed knob.
AUXILIARY HYDRAULICS
Two hydraulic outlets (mid and rear) are provided on the
tractor.
BHydraulic Block Type Outlet
Hydraulic block type outlet is useful when adding
hydraulically operated equipment such as front end
loader, front blade, etc.
When implement is attached
1. Remove the block cover.
2. Attach the block outlet cover. (option)
[Mid outlet]
(1) Position control lever (A) "FLOAT"
(B) "DOWN"
(C) "UP"
(1) 3-point hitch lowering speed knob (A) "FAST"
(B) "SLOW"
(C) "LOCK"
(1) Block cover
(2) Block outlet cover (option)
(3) Outlet
(4) Inlet
(5) Hydraulic block
(A) From gear pump
(B) To implement inlet
Max. flow
[B2630]: 21.2L/min
(5.6 U.S.gals./min)
[B3030/B3000]: 19.7 L/min
(5.2 U.S.gals./min)
No relief valve in the
hydraulic block.
(C) From implement outlet
To Next Page
Loading...
Need help?
General
