23OPERATING THE TRACTOR
BAdjustment of Foldable ROPS
A Adjust free fall of the ROPS upper frame regularly.
A If you feel less friction in folding the ROPS, tighten the
nut (1) until you feel the right friction in the movement.
STARTING
A The seat and suspension should be adjusted to
ensure that the controls are comfortably at hand for the
operator, ensuring that the operator maintains a good
posture and minimizes risks from whole body
vibration.
BOperator's Seat
To avoid personal injury or death:
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the tractor.
[B3150 ROPS]
C Travel adjustment
Pull in the position adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.
C Armrest angle adjustment
The armrest angle can be adjusted by the hex socket
head cap bolts (socket size 7/32 inch).
A After adjusting the operator's seat, be sure to check to
see that the seat is properly locked.
(1) Nut
1. Adjusting the operator's position.
(1) Seat
(2) Position adjust lever
(A) "PULL UP"
(1) Hex socket head cap bolt
(2) Armrest
To Next Page
Loading...
Need help?
General
