OPERATING THE TRACTOR36
BHourmeter / Tachometer
This meter gives readings for engine speed, PTO shaft
speed and the hours the tractor has been operated.
1. The tachometer indicates the engine speed and the
PTO shaft speed location on the dial.
2. The hourmeter indicates in 5 digits the hours the
tractor has been used; the last digit indicates 1/10 of
an hour.
BChanging Display Mode
1. The LCD monitor give several different displays.
2. The LCD monitor displays "Engine rpm" normally.
3. The display switch is pressed, the display is switched
to "Rear PTO speed", "Mid PTO speed", "Engine rpm".
A Models that are not equipped with the "Mid PTO" also
displays "Mid PTO speed".
(1) Engine revolution / PTO speed
(2) Hours used
(1) LCD monitor
(2) Display switch
To Next Page
Loading...
Need help?
General
