(1) Beacon light switch (A) Turn on
(B) Turn off
2. Beacon position (if equipped)
• In order to see the beacon in all directions by the
other road users, put the beacon at the top position
as shown in the figure.
• In order not to damage the turning light, when
the height is limited (under a building for example)
or when there are some obstacles (branches for
example), move the beacon to the bottom position
as shown in the figure.
(1) Beacon
(A) Top position
(B) Bottom position
(C) CAB
(D) Move
BEACON (IF EQUIPPED) CAB OPERATION
To Next Page
Need help?
General
