4. Connect the
quick coupler and lower the lever until
it stops, and then turn the safety-lock-button
clockwise.
(1) Lever
(2) Safety lock button
(A)
Lower
(B) Clockwise
IMPORTANT :
• Get the
quick coupler locked, and move up
and down the lever to make sure that the
quick coupler is tightly locked.
5. When mounting the third-function-kit, remove the
caps from the connectors of mobile side and tractor
side. Connect the connectors and the caps as
shown in the follow figures.
(1) Cap
(2)
Connector
[A]
Mobile side
[B] Tractor side
6. Make
sure that the mounting levers of both sides
are
at their low position as shown in the follow
figures.
(1) Mounting lever
7. Fasten
the seat belt. Start the engine and run at the
following speed.
Engine speed 1800 rpm
REINSTALLING THE LOADER
To Next Page
Loading...
Need help?
General
