Kubota BX23S User Manual

PRE-OPERATION CHECK OF THE BACKHOE
CHECKING OF THE BACKHOE
BEFORE OPERATION
WARNING
To avoid serious injury or death:
• Read the "Safe operation" in this manual.
• Read the warning and caution labels located on
the backhoe.
• Make sure that the swing-lock-pin is set before
entering or exiting the operator area of the
backhoe.
See PRECAUTIONS OF THE BACKHOE on page 14
and 3. Safety labels of the backhoe on page 22.
Prior to starting the engine, check the backhoe
according to CHECKING THE BACKHOE DAILY on
page 141 before operation.
PRE-OPERATING INSTRUCTION
OF THE BACKHOE
1. Check of the operator's seat
before operating the backhoe
You can use the operator's seat for the BX23S tractor
to operate the loader and backhoe. See 1. Operator's
seat on page 48 for the detail to turn the operator's seat
around for backhoe operation.
(1) Operator's seat (backhoe
position)
2. Check of the ballast before
operating the backhoe
WARNING
To avoid serious injury or death:
• Never remove the loader to ensure the stability
of the tractor at all times.
IMPORTANT :
• Do not add the liquid ballast or any other
weights to the front tires.
• While the BT603 backhoe is installed on the
tractor, the liquid ballast in the rear tires should
be removed.
3. Check of the tire inflation before
operating the backhoe
Make sure that the tractor tires are properly inflated.
See 1. Inflation pressure of tires on page 89.
Tire sizes Inflation Pressure
Rear
26x12.00-12 Turf
100 kPa
(1.0 kgf/cm
2
)
[14 psi]
26x12.00-12 Bar
120 kPa
(1.2 kgf/cm
2
)
[17 psi]
26x12.00-12 Ind.
120 kPa
(1.2 kgf/cm
2
)
[17 psi]
Front
18x8.50-10 Turf
120 kPa
(1.2 kgf/cm
2
)
[17 psi]
18x8.50-10 Bar
150 kPa
(1.5 kgf/cm
2
)
[22 psi]
18x8.50-10 Ind.
150 kPa
(1.5 kgf/cm
2
)
[22 psi]
PRE-OPERATION CHECK OF THE BACKHOE CHECKING OF THE BACKHOE BEFORE OPERATION
56
BX23S, LA340, BT603

Kubota BX23S Specifications

General

Brand	Kubota
Model	BX23S
Category	Tractor
Language	English