30 HYDRAULIC UNIT
HYDRAULIC UNIT
A Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A If noises are heard when implement is lifting after the
hydraulic control lever has been activated, the
hydraulic mechanism is not adjusted properly. Unless
corrected, the unit will be damaged. Contact your
KUBOTA Dealer for adjustment.
3-POINT HITCH CONTROL SYSTEM
BPosition Control
This will control the working depth of three-point hitch
mounted implement regardless of the amount of pull
required.
BFloat Control
Place the position control lever in the float position to
make the lower links move freely along with the ground
conditions.
B3-point Hitch Lowering Speed
To avoid personal injury:
A Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to two or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed knob.
(1) Position control lever (A) "FLOAT"
(B) "DOWN"
(C) "UP"
(1) 3-point hitch lowering speed knob (A) "FAST"
(B) "SLOW"
(C) "LOCK"
To Next Page
Loading...
Need help?
General
