CAB OPERATION96
INSTALLING THE IMPLEMENT CONTROL
BOX
1. Make a slit into the corner cover. Introduce the
implement control cable and hydraulic hose through
this slit into the CAB.
2. Remove the plugs in inner roof, and cut off the hatched
zone of the rear pillar cover with a utility knife. Attach
the control box stay with internal nuts.
ELECTRICAL OUTLET
BElectrical Outlet
A electrical outlet is supplied for use with implement.
(1) Corner cover
(1) Plug
(2) Pillar cover
(3) M6 nuts
(1) Connector for loader electrical outlet (15A)
(2) Accessory electrical outlet (20A)
(1) Accessory electrical outlet (15A)
To Next Page
Loading...
Need help?
General
