16 OPERATING THE ENGINE
1. Park the tractor in a safe area away from buildings, people, and animals.
2. Apply the parking brake.
3. Set the power shift / range shift lever and the shuttle shift lever to the neutral position.
4. Turn "OFF" the PTO clutch control switch.
5. Return the engine rpm to the idle speed.
During the regeneration cycle, do not touch the above levers, and switches, nor change the engine rpm. Otherwise, the
regeneration will be interrupted. Never leave the tractor when parked regeneration process is activated. Once
Regeneration process is complete, the tractor may be moved and returned to work.
A If the parked regeneration cycle is interrupted, the engine rpm is fixed at the idling level for about 30 seconds. For this
period, keep the hand throttle lever and foot throttle pedal at the idle position. Do not move them. They will function
again in 30 seconds.
Operating Procedure for Parked Regeneration
6. Once the parked regeneration switch starts flashing.
7. Press the parked regeneration switch to start the regeneration cycle.
(The switch light will remain "ON" constantly during the cycle.)
8. The engine rpm will automatically rise, and the regeneration process will begin.
9. Make sure the indicators stay "ON" while regenerating the DPF. They turn "OFF" when the cycle
is complete. The tractor can be moved and continue working.
To Next Page
Loading...
Need help?
General
