Kubota RTV-X900 User Manual

PERIODIC SERVICE60
BChecking Engine Start System
To avoid serious injury:
A Do not allow anyone near the vehicle while
testing.
A If the vehicle does not pass the test do not
operate the vehicle.
C Preparation before testing.
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
C Test: Range gear shift lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to H position.
3. Return the Speed control pedal to the "NEUTRAL"
position.
4. Shift the hydraulic lift cylinder lever to the "NEUTRAL"
position.
5. Turn the key to "START" position.
6. The engine must not crank.
7. Repeat the step 2 to 6 with the range gear shift lever
at "L" and "R" each position.
8. If it cranks, consult your local KUBOTA Dealer for
service.
(1) Differential lock pedal (spray type grease)
(1) Front A-ARM (Grease fitting)
(1) Rear A-ARM (Grease fitting)
(2) Parking brake link (spray type grease)
(A) Left rear tire
(1) Range gear shift lever
(2) Speed control pedal

Kubota RTV-X900 Specifications

General

Brand	Kubota
Model	RTV-X900
Category	Utility Vehicle
Language	English