5. Push the KRA system override switch.
(1) KRA system override switch
6. Look down and behind the machine to be sure that
no bystanders, especially children have entered the
area.
7. Depress the speed control pedal with the heel of
your right foot to move in the reverse direction.
NOTE :
1. The KRA system override mode can not be
activated by pushing the switch while the speed
control pedal is depressed to initiate rearward
movement.
2. The override switch light flashes while activated
as a reminder to the operator that PTO (for
example mower, grass catcher, snow blower
and so on.) remains engaged during reverse
travel.
3. The KRA system override mode will remain
activated until the PTO swich is returned to the
“DISENGAGED” position.
4. To prevent use of the KRA system override
mode, remove the fuse located in the panel:
• The engine can be started.
• The machine PTO can be engaged if the
speed control pedal is in the neutral or
forward position.
• Selection of PTO operation (for example
mower, grass catcher, snow blower and so
on.) during reverse travel is not possible.
(1) KRA fuse
(2) Panel
OPERATING THE MOWER OPERATING THE MOWER
T2090BR-AU,T2290KW-AU,T2290KWT-AU
To Next Page
Loading...
Need help?
General
