Kubota T2090BR-AU User Manual

The override switch light flashes while activated
as a reminder to the operator that the PTO (i.e.
mower, grass catcher, snowblower, etc.)
remains engaged during reverse travel. The
operator should return the KRA system to
normal operating mode as soon as possible by
momentarily disengaging the PTO.
1. KRA system normal operating
mode
1. Start the engine.
2. Set the throttle lever to the “FAST” position.
(1) Throttle lever (A) “FAST” position
(B) “SLOW” position
3. Pull up the PTO switch to the “ENGAGED” position.
2. PTO switch
1. To engage the PTO, pull the PTO switch to the
“ENGAGED” (ON) position.
2. To disengage the PTO, push the PTO switch
“DISENGAGED” (OFF) position.
(1) PTO switch
(A) “DISENGAGED” (OFF)
(B) “ENGAGED” (ON)
NOTE :
• If you get off the seat while the PTO is
running, the engine will stop automatically
(operator presence control).
• Before starting the engine, push the PTO
switch to the “DISENGAGED” (OFF)
position. If it is at the “ENGAGED” (ON)
position, the engine will not start.
• These interlock features are built-in.
3. KRA system override mode
WARNING
To avoid serious injury or death:
• Before and when backing, look down and
behind the machine to be sure no bystanders,
especially children, have entered the area.
• Engine components can get extremely hot from
operation. To prevent severe burns, do not
touch these areas while the engine is running,
or immediately after it is turned off.
• Never operate the engine with heat shields or
guards removed.
NOTE :
• KRA system override switch allows the operator
to mow or operate attachments while in reverse
if the operator deems it absolutely necessary
and safe to do so. (i.e. the operator should
make sure that no bystanders, especially
children, have entered the area.)
If the owner does not wish certain operators to
utilize the override switch allowing mowing or
implement operation in reverse, then he or she
may remove the fuse from the system to
prevent override. (See NOTE (4) below.)
1. Start the engine.
2. Set the throttle to the “FAST” position.
3. Pull the PTO switch to the “ENGAGED” position.
4. Stop the machine (Set the speed control pedal to
“NEUTRAL”.) or depress the speed control pedal
forward.
OPERATING THE MOWER OPERATING THE MOWER
34
T2090BR-AU,T2290KW-AU,T2290KWT-AU

Kubota T2090BR-AU Specifications

General

Brand	Kubota
Model	T2090BR-AU
Category	Lawn Mower
Language	English