EasyManua.ls Logo

Kubota WSM User Manual

Kubota WSM
369 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
G-22
ZD18(F) · ZD21(F) · ZD28(F), WSM
G GENERAL
Test 6 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever (4) to “DISENGAGE” (OFF) position.
4. Grasp the motion control levers (3) and move then inward from
“NEUTRAL LOCK” position to “NEUTRAL” position and then
release the levers.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off.
Test 7 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever (4) to “ENGAGE” (ON) position.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off.
W1032761
(1) Parking Brake Lock Pedal
(2) Parking Brake Release Lever
(3) Motion Control Lever
(4) PTO Lever
(5) Key Switch
KiSC issued 04, 2009 A

Table of Contents

Questions and Answers:

Kubota WSM Specifications

General IconGeneral
BrandKubota
ModelWSM
CategoryLawn Mower
LanguageEnglish

Summary

SAFETY INSTRUCTIONS

BEFORE SERVICING AND REPAIRING

Essential safety checklist and procedures before starting maintenance.

SAFETY WORKING

General guidelines for safe operation and maintenance practices.

PREPARE FOR EMERGENCIES

Recommendations for keeping first aid and emergency contacts ready.

SAFETY DECALS

Information on identifying, maintaining, and replacing safety labels.

SPECIFICATIONS

Engine Specifications

Detailed technical specifications for the engine models (ZD18, ZD21, ZD28).

Capacities

Information on fuel tank, engine oil, coolant, and transmission fluid capacities.

Dimensions

Physical measurements including length, width, height, and wheel base.

G. GENERAL

1. IDENTIFICATION

Guide to locating machine, engine, and mower serial numbers for reference.

4. LUBRICANTS, FUEL AND COOLANT

Details on recommended lubricants, fuel types, and coolant specifications.

5. TIGHTENING TORQUES

Specified torque values for various screws, bolts, and nuts.

6. MAINTENANCE CHECK LIST

A periodic maintenance schedule outlining checks and replacements.

ENGINE

1. TROUBLESHOOTING

Guide to diagnosing and resolving common engine operational issues.

5. CHECKING, DISASSEMBLING AND SERVICING

Detailed procedures for engine disassembly, assembly, and servicing.

TRANSAXLE

2. TRAVELLING SYSTEM

Details the hydrostatic transmission, including structure, pump, motor, and operation.

4. CHECKING AND ADJUSTING

Procedures for checking and adjusting neutral position, creep speed, and maximum speed.

5. DISASSEMBLING AND ASSEMBLING

Step-by-step instructions for separating and reassembling the transaxle.

FRONT AXLE

1. STRUCTURE

Describes the construction and support mechanism of the front axle.

4. CHECKING, DISASSEMBLING AND SERVICING

Procedures for checking and adjusting the front axle pivot.

HYDRAULIC SYSTEM

1. HYDRAULIC CIRCUIT

Diagram and explanation of the overall hydraulic system operation.

5. MOWER LINKAGE

Describes the mechanism for lifting and adjusting the mower deck height.

ELECTRICAL SYSTEM

1. WIRING DIAGRAM

Electrical schematics for the tractor's electrical system.

2. STARTING SYSTEM

Explanation of the starting system operation and troubleshooting.

5. CHECKING, DISASSEMBLING AND SERVICING

Procedures for checking and servicing battery, starting, charging, lighting, and gauges.

ROTARY MOWER

1. POWER TRANSMISSION

Explains how power is transmitted from the PTO to the mower blades.

4. CHECKING, DISASSEMBLING AND ASSEMBLING

Procedures for adjusting anti-scalp rollers and cutting height.

Related product manuals