Owner Information
12
Collection of motorcycle data record
The ECU of this model collects and records the
information on motorcycle to assist in fault diagnosis and
troubleshooting.
To acquire the information, it is required to connect the
Kymco diagnosis tool to the diagnosis connector of the
motorcycle (e.g. maintenance check or repair).
Refer to the figure on the right.
The sensor and recorded information depend on the
Kymco model. However, the main information available
is as follows:
1. Information on motorcycle status and engine
performance
2. Information on motorcycle injection and emission
Kymco will not disclose this information to a third party
except for the following conditions:
1. Kymco has acquired the approval of the user and
owner of the vehicle.
2. The law requires Kymco to provide such information.
3. Kymco must submit the information to the court for
litigation.
4. Kymco must provide such information for research
purposes and this information is not related to a
specific motorcycle or owner.
Diagnosis connector
To Next Page
Loading...
Need help?
General
