KYMCO CV3 Series User Manual

3
Control Functions of Mechanism
68
4
Main Stand
1: Main Stand
When parking with Main Stand, stop the engine and turn
the Main Switch off. While keeping the vehicle
perpendicular to the ground, holding the Left Handlebar
with left hand and Rear Grip with right hand, thread upon
the Main Stand using the right foot and exert force with
both right foot and right hand to lift the vehicle up to a
standing pose.
Warning
 Make sure the Main Stand springs up fully before
riding the vehicle.
 The Main Stand must not come in contact with the
ground while riding the vehicle, otherwise it may
interfere the riding and cause loss of control due to
abrasion with the ground.
 Main Stand may fail to spring up to position while
running the vehicle if the bracket spring becomes
weak. Go to a KYMCO service station for
replacement as soon as possible.
Caution
When using the main stand to erect the vehicle, release
the anti-tilting lock first to avoid parking difficulties due to
unlevelled vehicle conditions.

KYMCO CV3 Series Specifications

General

Brand	KYMCO
Model	CV3 Series
Category	Motorcycle
Language	English