Control Functions of Mechanism
65
12V Power Socket
1. 12V Power Socket2: Protection Cap
This vehicle is equipped with the 12V power socket
on the left front side inside the storage box.
Your may connect a low power consumption product
to the Socket, for charging the product while the
engine is running.
The maximum load for the power socket: 25W Max.
To avoid electrocution or short-circuit, make sure to
cover-up the protection cap after using the 12V
Power Socket.
To prevent any accident from occurring, park your
Scooter at a safe location before using the 12V
Power Socket.
12V Power Socket can only be used with a running
engine.
To prevent power depletion of battery, do not charge
a product using the 12V Power Socket without
running the engine.
To prevent fuse from being blown, do not charge a
product with a load exceeding 25W; if overheat
occurs during charging, the system will cut off power
supply automatically.
After riding and before leaving the vehicle, make sure
the product is unplugged and the Protection Cap is
properly covered back.
If the power is disconnected, reduce the load, turn off
the main switch and then restart the power.
Do not attempt to alter the power to prevent
damaging the wiring system of the entire vehicle.
To Next Page
Loading...
Need help?
General
