KYMCO CV3 Series User Manual

3
Control Functions of Mechanism
38
4
KEYLESS Main Switch
KEYLESS Main Switch
KEYLESS Controller Theft Prevention Setting –
Remote Sensing (Locking)
 When the user stops the vehicle and leaves, please
press the KEYLESS main switch button. The system
will make a long beep sound, and this will complete
the power-off and locking action.
KEYLESS CONTROLLER Theft Prevention Setting –
Remote Sensing (Unlock)
 Press the main switch button, and the main switch will
make 2 short beep sounds. The screen will display the
power-on scanning screen. The engine can be started
once completed.
Caution
 Under engine non-ignition state, when the keyless car
key leaves the sensing distance, the system will make a
beep sound after 30 sec and turn-off.
 When travelling, when the keyless car key leaves the
sensing distance, the engine will not shut down. It needs
to be turned off manually in idle state.
 When the keyless car key is out of power or there is
interference in the environment, leading to the ability to
lock the vehicle, the short-range sensor can be used.
 It is strongly recommended that the user shall use
Remote Sensing (Locking) mode to activate the Theft
Prevention function.
 If you cannot operate the KEYLESS main switch from
long range, please replace the wireless key battery or
use the near-range sensing function to lock the vehicle.

KYMCO CV3 Series Specifications

General

Brand	KYMCO
Model	CV3 Series
Category	Motorcycle
Language	English