EasyManua.ls Logo

KYMCO CV3 Series - Brake Fluid and Brake Lining Inspection

KYMCO CV3 Series
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Checks before Riding
93
6
Inspection of front/rear brake oil
1. Set the handlebar squarely and then check the
brake oil in the left and right fuel tank. Keep the level
between the Upper Mark and Lower Mark.
2. If the oil level is approaching the lower limit “L” mark,
check the abrasion extent of the brake lining.
3. If the brake lining is not worn exceeding a specified
limit, most likely there is a leakage of brake fluid; go
to a dealer for repair.
Brake oil peep window
Front / rear brake oil replenishing
1. Straighten the Handlebar, remove 2 fixing screws of
Reservoir and remove Reservoir Cover.
2. Replenish Reservoir with recommended DOT-4 Brake
Fluid to the Upper Scale. Install Reservoir Cover and
tighten 2 fixing screws.
3. Replace Brake Fluid every 10000km or 1 year.
Reservoir Cover of Brake Fluid
Warning
Mixed use of brake fluids of different brand and
different specifications may result in braking fault and
danger.
When replenishing the braking fluid, cover painting
parts with a cloth to prevent damaging them.

Table of Contents

Related product manuals