PRE-RIDE INSPECTION
For your safety, it is very important to take a few
moments before each ride to walk around your
scooter and check its condition. If you detect
any problem, be sure you take care of it, or
have it corrected by your KYMCO dealer.
1. Engine oil level: add engine oil if required
. Check for leaks.
2. Fuel level: fill fuel tank when necessary
. Check for leaks.
(page 59)
(page 30)
Improperly maintaining this scooter or
failing to correct a problem before
riding can cause a crash in which you
can be seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.
WARNING
3. Coolant level: add coolant if required. Check
for leaks .
4. Front and rear brakes: check operation;
make sure there is no brake fluid leakage
.
5. Tires: check condition and pressure
.
6. Throttle: check for smooth opening and full
closing in all steering positions.
7. Lights and horn: check that headlight,
tail/brake light, turn signals, indicators and
horn function properly.
8. Engine stop switch: check for proper function
9. Side stand ignition cut-off system: check for
proper function .
10. Steering: check for condition and
smoothness.
(page 71)
(page 75)
(page
82)
(page 26).
(page 74)
40
To Next Page
Loading...
Need help?
General