KYMCO DINK 125 User Manual

TOOL KIT
(see page 32)
CRANKCASE BREATHER
To assist you in the performance of periodic
maintenance, a tool kit (1) is supplied and in the center
compartment .
1. Remove the crankcase breather tube plug (1) from the
tube and drain deposits into a suitable container.
2. Reinstall the crankcase breather tube plug.
Service more frequently when riding in rain, at full throttle,
or after the scooter is washed or overturned. Service if
the deposit level can be seen in the transparent section
of the drain tube.
(1)
(1)
57

KYMCO DINK 125 Specifications

General

Displacement	124.6 cc
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Width	730 mm
Seat Height	780 mm
Cooling System	Air-cooled
Transmission	Automatic CVT
Starter	Electric