KYMCO DINK 125 User Manual

Removal from storage
(see page 40)
1. Uncover and clean the scooter.
2. Change the engine oil if more than 1 months have passed since the start of storage.
3. Charge the battery as required. Install the battery.
4. Drain any excess aerosol rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh petrol.
5. Perform all Pre-ride inspection checks . Test ride the scooter at low speeds in a
safe riding area away from traffic.
93

KYMCO DINK 125 Specifications

General

Displacement	124.6 cc
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Width	730 mm
Seat Height	780 mm
Cooling System	Air-cooled
Transmission	Automatic CVT
Starter	Electric