20. EVAPORATIVE EMISSION CONTROL SYSTEM
Downtown 300i ABS
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Do not smoke or allow flames or sparks near the working area.
• Note the locations of tubes for proper installation.
• Replace any damaged tube with a new one.
• Make sure to tighten the connector of each tube securely.
TOOLS
• Vacuum pump－A937Χ－014－ΧΧΧΧ
• Pressure pump－
SPECIFICATIONS
Purge control valve vacuum pressure 45mm/Hg
Charcoal canister capacity 90cc
A. LEAKAGE TEST PIPING DIAGRAM
Fuel Tank
Fuel Injector
Throttle Body
Manifold
Absolute
Pressure Sensor
Air Cleaner
Air By Pass Valve
Charcoal Canister/ Purge Control Valve
20-3
To Next Page
Loading...
Need help?
General
