KYMCO K-XCT 125i User Manual

9. FINAL REDUCTION
9-2
K-XCT 125i
SERVICE INFORMATION
GENERAL INSTRUCTIONS
 The servicing operations of this section can be made with the engine installed.
 When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.13L
At change : 0.12L
TORQUE VALUES
Transmission case cover bolt 1.0~1.4kgf-m
SPECIAL TOOLS
Oil seal and bearing installer A120E00014
Bearing puller A120E00037
TROUBLESHOOTING
Engine starts but motorcycle fail to move
 Damaged transmission
 Seized or burnt transmission
Abnormal noise
 Worn, seized or chipped gears
 Worn bearing
Oil leaks
 Oil level too high
 Worn or damaged oil seal

KYMCO K-XCT 125i Specifications

General

Brand	KYMCO
Model	K-XCT 125i
Category	Motorcycle
Language	English